What a 30-Second AI Video Really Costs in 2026

Published October 2026 · 10 min read

Ask what a 30-second AI video costs and you will get answers ranging from “about a dollar” to “I spent two hundred and got nothing usable.” Both are honest. They are describing different things.

The confusion comes from treating “30 seconds of video” as a single unit. It is not. It is a duration multiplied by three variables that most people forget to count: resolution, audio, and retries. Get those wrong and your budget estimate will be off by a factor of ten or more.

This article does the arithmetic in the open, using the same public API list prices that power our cost calculator. All figures are USD per second of generated output, compiled from public pricing pages as of July 2026. Confirm on the vendor's page before any large job — these move.

The base rate: what one second costs

Here is the spread across ten models at 720p and 1080p. This is the number people quote when they say AI video is cheap, and for the low end they are right.

Model720p / sec1080p / secAudio
Kling 3.0 (API resellers)$0.04$0.08No
Wan 2.6$0.05$0.05No
Runway Gen-4 Turbo$0.05$0.10No
Veo 3.1 Lite$0.05$0.10Included
Veo 3.1 Fast$0.10$0.20Included
Sora 2$0.10—Included
Runway Gen-4.5$0.12$0.24No
Seedance 2.5$0.20$0.40Included
Sora 2 Pro$0.30$0.50Included
Veo 3 (original)$0.75—Included

The spread from cheapest to most expensive is roughly 19× at 720p. That single fact explains most of the contradictory numbers you see online. Someone quoting “$1.20 for 30 seconds” is using Kling at 720p. Someone quoting “$22.50” is using Veo 3. Neither is lying.

Multiplier one: resolution

Moving from 720p to 1080p is not a linear upgrade. On several models it roughly doubles the per-second rate:

Wan 2.6 is the outlier and worth remembering: it generates natively at 1080p for the same rate. If your output genuinely needs 1080p and you are on a tight budget, that single line item can halve your spend.

A practical note: 1080p is not always necessary. Vertical short-form is viewed on a phone at roughly 1080×1920, so 1080p is the correct target there. But for a shot that will be cropped, reframed, or shown as a background element, 720p upscaled in the edit is usually indistinguishable and half the price.

Multiplier two: audio

Models marked “Included” generate synchronised audio — dialogue, ambient sound, effects — as part of the render. Models marked “No” produce silent video and you add audio separately.

This looks like a simple feature difference and it is actually a budget question. If you are producing talking-head content or anything where lip-sync matters, a silent model means you are paying twice: once for the video, once for a separate voice/lip-sync pass. On the cheap end that can double the effective cost of the shot.

Conversely, if your video is music-driven with no dialogue — product b-roll, aesthetic montage, most faceless channel content — paying for native audio is paying for something you will mute in the edit. In that case the silent models are strictly better value.

Multiplier three: retries (the one that actually breaks budgets)

This is where the naive calculation falls apart. You do not pay for the video you use. You pay for every generation you attempt.

In practice, a shot that reads as final usually takes two to four attempts. The first establishes composition, the second fixes a detail, the third may be needed because the model drifted on the face or the hands. Professional workflows budget three generations per finished shot as a baseline — and that is on models you know well.

So the honest formula for a 30-second video is:

cost = 30 seconds × (retries per shot) × (price per second)

Which means a 30-second video is really 90 seconds of paid generation at three attempts per shot. Here is what that does to the numbers at 1080p:

Model (1080p)One pass (30s)Realistic (90s)Heavy retry (150s)
Wan 2.6$1.50$4.50$7.50
Kling 3.0$2.40$7.20$12.00
Runway Gen-4 Turbo$3.00$9.00$15.00
Veo 3.1 Lite$3.00$9.00$15.00
Veo 3.1 Fast$6.00$18.00$30.00
Runway Gen-4.5$7.20$21.60$36.00
Seedance 2.5$12.00$36.00$60.00
Sora 2 Pro$15.00$45.00$75.00

“Heavy retry” is five attempts per shot, which happens when you are learning a new model or chasing a difficult composition. Note that at the top of the table, a single 30-second clip can cost more than a month of a consumer subscription. That comparison is the next trap.

API pricing versus subscription pricing

Everything above is API pay-as-you-go pricing, which is the cleanest way to compare models because you pay for exactly what you generate. Consumer subscriptions bundle a credit allowance at an effective rate that is often much lower — and that is genuinely the better deal if you are a solo creator producing a handful of clips a week.

The subscription becomes the worse deal when you hit the ceiling: credits run out mid-project, the top-up rate is worse than the bundled rate, and you are locked to one model for everything. The break-even is roughly where your monthly generation volume exceeds what the bundled credits cover — below that, subscribe; above it, go API and route each shot to whichever model is best value for that shot.

If you are converting between credits and dollars to compare a subscription against API rates, the credits converter does that arithmetic directly.

Costs the calculator does not show

Generation is the visible cost. Three others are real and routinely ignored:

Five ways to actually reduce the bill

  1. Draft at 720p, finish at 1080p. Compose and iterate at the cheap resolution. Only re-render the approved take at full resolution. This alone typically cuts generation spend by 40–50%.
  2. Route by shot, not by project. A wide establishing shot does not need the most expensive model. A close-up with dialogue probably does. Mixing two or three models in one project is normal professional practice, not a compromise.
  3. Shorten the shots. AI video holds up better in 3–5 second increments. Six 5-second shots cost the same as one 30-second shot in per-second terms — but each short shot has a much higher chance of being usable on the first or second attempt, which is where the real saving is.
  4. Write the prompt properly the first time. Most retries are caused by missing information, not by model randomness. The nine tells that make AI video look fake are, from a budget perspective, nine causes of wasted generations.
  5. Keep silent when you will mute it. If the final video is music-driven, do not pay a premium for native audio you will discard.

A worked example: the 30-second product spot

Abstract ranges are easy to nod at and hard to act on. Here is a real allocation for a 30-second product video, split into six shots of five seconds each, with three attempts budgeted per shot — 90 seconds of paid generation in total.

ShotWhat it isModel (1080p)Paid secondsCost
1Wide establishing shot, no facesWan 2.615$0.75
2Product close-up, staticVeo 3.1 Lite15$1.50
3Product detail, slow push inVeo 3.1 Lite15$1.50
4Person using it, needs audioVeo 3.1 Fast15$3.00
5Texture b-roll, silentKling 3.015$1.20
6Closing shot, silentKling 3.015$1.20
Total$9.15

Compare that with two single-model approaches for the same 90 paid seconds:

The routed version costs roughly half of the cheapest single-model option and a fifth of the most expensive. Nothing was sacrificed: the establishing shot genuinely did not need a premium model, and the one shot that needed native audio got the model that provides it. This is what “route by shot” means in practice, and it is the single highest-leverage change most people can make to their spend.

So what does it actually cost?

For a 30-second video at 1080p with realistic retries, the honest range is $4.50 at the low end to $45 at the high end, with most work landing between $9 and $22. That is the answer to the question, and it is deliberately a range rather than a number — because the three multipliers above are choices, not constants.

The comparison that matters is not AI model versus AI model. It is AI generation versus the alternative. A comparable 30-second spot from a freelance videographer, with a shoot day, talent and editing, typically runs several hundred dollars at minimum. Our AI vs freelancer cost breakdown puts real numbers on that gap — and it is the reason this whole category exists.

Two caveats worth repeating before you build a budget on any of this. First, these are list prices compiled in July 2026, and every vendor in the table has changed its rates at least once in the past year — treat the absolute numbers as a planning baseline rather than a quote. Second, regional pricing, sales tax and promotional credits are excluded from every figure here. If you are paying in a currency other than USD, the effective rate per second can differ noticeably from the published API price, and that difference is usually larger than the gap between two adjacent models in the table.

Run your own figures in the cost calculator before the next project. Enter the duration you actually need, at the resolution you will actually deliver, with the retry count you actually experience — not the one you hope for.